• 3” diameter X .75” wide Foam Tires have good traction and absorb hits that would destroy other tire types. These tires are softer and dimensionally more consistent than other brands. These parts are used on the Snap Hubs of the KINETIC kit.usa
  • Turnigy Nano-Tech 4S (14.8 volt) 850mAh 45-90C Lipo Battery. Contains XT60 Female Connector and balance connector. This part is attached to the XT60 Battery Connector and Wire Harness of the KINETIC kit.
  • BotKits 22mm diameter, 780 RPM (at 12 volts) Planetary Gearmotor. 4mm diameter shaft (with flat) made of S7 tool steel. Planetary gears constructed of Steel. This part is attached to the Drive Motor Mounting Plate of the KINETIC kit.
  • Hobbywing XRotor Pro 40A 3D ESC. Brushless speed controller with reversing capability ensures that the spinner bar is just as effective when bot is inverted. Does not require programming or firmware “flashing” like some other ECS’s. Operates with a “soft start” feature. We suggest using with a 3S or 4S LiPo battery. This part is attached to the Spinner Bar Motor of the KINETIC kit.
  • Turnigy Brushless Inrunner 1980KV. Powerful, robust motor has a 28mm diameter body with 3.175mm (1/8”) diameter shaft with flat. We suggest using with a 3S or 4S LiPo battery. This part is used in the Bar Motor Mount Clamp of the KINETIC kit.
  • CNC machined from strong 6061-T6 aircraft-grade aluminum. Fits 22mm diameter Gearmotor. This part is used on the Sideplates of the KINETIC kit. Also, includes 8 screws.
  • Pololu TReX Jr is a versatile 5 channel controller that provides 2.5 Amps continuous to each of two motor channels. Channel 4 can be used for “Flipped Mode” if bot is inverted. Two additional channels are available for other functions. This part is attached to the Wire Harness and Receiver of the KINETIC kit. Note- a minimum of two Motor Controller Leads are required for this controller. A third lead is required if “Flipped Mode” functionality is desired.
  • FingerTech Mini Power Switch is rated for 40 Amps continuous. High-temperature Nylon body, with copper terminals and aluminum switching screw. This part is used on the Wire Harness of the KINETIC kit. Uses a 3/32” hex wrench for operation.
  • 2-56 X 3/4” Flat Head Phillips Machine Screws. Stainless Steel. 2-56 X 3/16” wide Hex Jam Nut. Zinc-plated Steel. These parts are used to attach the Mini Power Switch of the KINETIC kit. Uses a #0 Phillips driver and a 3/16” wrench or socket.
  • 6” 22ga 3-wire servo lead with two Female connectors for pin headers. This part is attached to the Motor Controller and Receiver of the KINETIC kit. Note- a minimum of two Leads are required for Motor Controller. A third Lead is required if “Flipped Mode” functionality is desired.
  • Receiver

    $17.49
    Common Sense RC 2.4 GHz 6 Channel Receiver. Compatible with DSM2/DSMX radio systems (like Spektrum). Failsafe function. Reliable, lightweight and has a small envelope. Bind Plug included. This part is attached to the ESC’s of the KINETIC kit.
  • The Robot Power Scorpion Mini is a small low-cost high-performance dual channel H-bridge speed controller for small robots, and other electrical loads. It is designed for ant and beetle weight combat robots, R2D2 replicas, sumo robots, and other small robots such as firefighting robots, maze solvers and carpet rovers. The Scorpion Mini is also suitable to drive pneumatic valves, solenoids, relays and thermoelectric coolers.
  • Snap Hub

    $16.49
    FingerTech two-piece Hubs with Snap Rings fit 4mm Motor shaft and .75” wide Foam Tires. 6061 Aluminum with Spring Steel Snap Rings and 8-32 Steel setscrews. These parts are used on the Gearmotor of the KINETIC kit. Uses a 5/64” hex wrench and snap ring pliers.