• Exclusive custom pulley designed for use with 2L V-belts. 6061-T6 aircraft-grade Aluminum. Dual side-by-side set screws ensures solid attachment to motor shaft without slippage/rotation. Bore is .125” diameter. usa(2) 4-40 X 3/16” Cup Point Set Screws included. This part is used on the Spinner Bar Motor of the KINETIC kit. Uses a .050” hex wrench.
  • Exclusive custom pulley designed for use with 2L V-belts. 6061-T6 aircraft-grade Aluminum. Pulley interlocks with Bar to better transmit power and reduce shear forces on screws. Drilled for two 8-32 Flat Head attachment screws. (2) 8-32 X 7/8” Flat Head Socket Machine Screws included. This part is used on the Spinner Bar of the KINETIC kit.usa Uses a 3/32” hex wrench.
  • 3” diameter X .75” wide Foam Tires have good traction and absorb hits that would destroy other tire types. These tires are softer and dimensionally more consistent than other brands. These parts are used on the Snap Hubs of the KINETIC kit.usa
  • Turnigy Nano-Tech 4S (14.8 volt) 850mAh 45-90C Lipo Battery. Contains XT60 Female Connector and balance connector. This part is attached to the XT60 Battery Connector and Wire Harness of the KINETIC kit.
  • BotKits 22mm diameter, 780 RPM (at 12 volts) Planetary Gearmotor. 4mm diameter shaft (with flat) made of S7 tool steel. Planetary gears constructed of Steel. This part is attached to the Drive Motor Mounting Plate of the KINETIC kit.
  • Bottom Plate

    $17.99
    Machined from stiff, sturdy G-10/FR4 Garolite laminate. Black color. Contains mounting slots for the Bar Motor Mount Clamp. This part is used for the bottom of the KINETIC kit.usa
  • Hobbywing XRotor Pro 40A 3D ESC. Brushless speed controller with reversing capability ensures that the spinner bar is just as effective when bot is inverted. Does not require programming or firmware “flashing” like some other ECS’s. Operates with a “soft start” feature. We suggest using with a 3S or 4S LiPo battery. This part is attached to the Spinner Bar Motor of the KINETIC kit.
  • Turnigy Brushless Inrunner 1980KV. Powerful, robust motor has a 28mm diameter body with 3.175mm (1/8”) diameter shaft with flat. We suggest using with a 3S or 4S LiPo battery. This part is used in the Bar Motor Mount Clamp of the KINETIC kit.
  • FEATURES: Durable UHMW polymer frame and Wheel Armor. Front Wedgelets made of strong 7075-T6 aluminum, defeat wedgebot opponents. Stiff, sturdy G10/FR4 Garolite Bottom Plate. Top Plate made of tough Polycarbonate with gray smoked tint. All fasteners required to assemble Chassis Kit are included
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • The D2 kit is professional grade combat robot able to deal out damage with its wedge blade, and take massive impacts from bots with spinning weapons, and keep on running.  This kit has been refined over the 2014, 2015, 2016, and 2017 competition seasons, learning from combat failures, and addressing those failures in each design iteration, resulting in our current very robust and competitive design.
  • CNC machined from strong 6061-T6 aircraft-grade aluminum. Fits 22mm diameter Gearmotor. This part is used on the Sideplates of the KINETIC kit. Also, includes 8 screws.
  • Pololu TReX Jr is a versatile 5 channel controller that provides 2.5 Amps continuous to each of two motor channels. Channel 4 can be used for “Flipped Mode” if bot is inverted. Two additional channels are available for other functions. This part is attached to the Wire Harness and Receiver of the KINETIC kit. Note- a minimum of two Motor Controller Leads are required for this controller. A third lead is required if “Flipped Mode” functionality is desired.
  • Front Plate

    $36.99
    CNC machined from durable Ultra High Molecular Weight (UHMW) polyethylene. Black color. Contains mounting holes for the Mini Power Switch. This part is used for the front end of the KINETIC kit.usa
  • FingerTech Mini Power Switch is rated for 40 Amps continuous. High-temperature Nylon body, with copper terminals and aluminum switching screw. This part is used on the Wire Harness of the KINETIC kit. Uses a 3/32” hex wrench for operation.
  • 2-56 X 3/4” Flat Head Phillips Machine Screws. Stainless Steel. 2-56 X 3/16” wide Hex Jam Nut. Zinc-plated Steel. These parts are used to attach the Mini Power Switch of the KINETIC kit. Uses a #0 Phillips driver and a 3/16” wrench or socket.
  • 6” 22ga 3-wire servo lead with two Female connectors for pin headers. This part is attached to the Motor Controller and Receiver of the KINETIC kit. Note- a minimum of two Leads are required for Motor Controller. A third Lead is required if “Flipped Mode” functionality is desired.
  • High-quality SCE55 size bearing for .3125” diameter Spinner Bar Axle. Steel construction. These parts are used in the Spinner Bar of the KINETIC kit.
  • 6-19 X 1” Pan Head Phillips Thread-Forming Screws. Tri-Lobe design for holding strength. Zinc-plated steel. These parts are used to attach the Front, Rear, Side Plates and Wheel Armor of the KINETIC kit. Uses a #2 Phillips driver.usa
  • Rear Plate

    $20.99
    CNC machined from durable Ultra High Molecular Weight (UHMW) polyethylene. usaBlack color. This part is used for the rear end of the KINETIC kit.